Advantages And Disadvantages Of Finger Joint Board And Melamine Plywood Board And Processing Technology

- Mar 25, 2019-

finger joint plywood

     Plywood's many layers (or plies) make it more cheap. and resistant to seasonal movement than solid wood, especially for large panels. But those plies also weaken butt joints in project construction. These three joinery methods maximize the strength of plywood joints.

     Created for beauty, ease of installation, and durability. Sheet Goods are beautiful front to back.  Perfect for Cabinets, Doors, Drawer Fronts, Wall treatments, vintage buildings and more.  Several styles are always stocked in our warehouse. and custom products are available with smallest orders.

  finger joint advantages and disadvantages 

  finger joint advantages 

      Finger joint board. Although the processing method of the finger joint board. and the block board is somewhat similar. since it does not need to press the upper and lower splint, the glue used is muchless than the block board, which is also It is one of the reasons why it circulated. Besides to the advantages of environmental protection. there are many other advantages of the finger joint. 


    For example, its surface can used with clear water paint, the effect of the paint seal is more friendly. besides, price, the finger joint plate is very affordable. and the finger joint plate made of solid wood, so it has a natural texture.

disadvantages of a finger joint 

     finger joint board: Although the finger joint board is solid wood material. but the furniture made with it is not solid wood furniture. Moreover, since pine wood, cypress wood. are generally used for making finger joint boards. these woods have a large water content and are thus deformed.

disadvantages of plywood

How do you join plywood screws?

       Finger joint bits, make solid molding cuts and add strength to your standard miter joints. You’ve seen paint-grade moldings prefilled nail at the home center. the stuff made up of those short pieces joined end-to-end with finger box joint. Have you ever thought how great it would be to “stretch" a board like that? Did you know you can cut that joint on your router table? 

      The plywood finger joint is a positive-negative interloc. in which tapered projections (the fingers) on one piece fit into tapered grooves in the other. It expands the glue area threefold, but more , it exposes long grain prefilled surface for gluing. That’s why it works for end-to-end joinery.

     miter gauge joint end grains glue very. but adding a finger joint to the ends of the miter adds surfaces for glue-ups. allowing them to hold fast and strengthen the joint . It works great for miter joints as well as for joining plywood panels to each other and to four edges banding. 

      The bit that table saw cuts the joint is not cheap, and when you see additional information, you understand why. The bit comprises a stack of four-wing finger cutters and a thicker shoulder dado blade cutter. along with a ball bearing guide on a 1/2"-shank arbor. The full dado set assembly is impressive, though at over 1-1⁄2" in diameter, stacked dado can run at full speed in a 1-1⁄2 HP router.

       Out of the box tectona grandis, the bit has five finger cutters stacked atop the bearing and capped with the shoulder cutter. You must reorder the stack according to the stock thickness. For example, you use only two finger cutters and the shoulder cutter to mill stock that’s 5/8" to 13/16" thick. 1/4 smooth  mixed  width fingerjoint wirebrushed

     Besides to miter joints. finger joint cuts are good for reinforcing plywood and sheet good joinery. To set up, you remove the spindle nut and the cutters. (It’s easiest to do with the arbor chucked in a router.) Leave the bearing at the bottom. Add the appropriate number of finger cutters for the given stock thickness. and then the shoulder cutter. 

      The shoulder cutter always tops the “working” stack. The remaining finger cutters go on top of that, where they’ll be “out of play.” You rout one workpiece face-up, the other four sides-down. When the bit height is correct, the two pieces should slide together with their faces flush.


finger joint advantages and disadvantages

finger joint wood  vs melamine plywood

     What Is The finger jointed Fingerboard? What Is The Melamine Plywood Board?Before we understand the advantages. and disadvantages of the fingerjoint board and the melamine board. and the processing technology. let's learn what is the finger joint board and what is the melamine plywood board?

     Finger joint board: It made up of many pieces of wood board. The upper and lower sides will no longer stick to the splint. Because the vertical wood board adopts a jagged interface. it is like the two hand fingers cross docking, so it called the finger joint board.

       melamine plywood , there are many kinds of names in the industry. the common name is the paint-free board and melamine board. The original name called melamine board, the full name is

melamine impregnated film paper veneer wood-based panel. but due to China's dairy product pollution incident. it was later forced to change its name, the industry called the paint-free board. also called the melamine sheets .

 melamine plywood advantages: 

       melamine plywood board shape, color coordination. its surface can imitate all kinds of trees, although there is no such natural flavor. but the realistic texture. and color can bring people a natural and simple feeling. Besides, the performance of the mdf board is excellent in all aspects. such as corrosion resistance. general acid and alkali alcohol. 

       and other solvents are not effective for the melamine plywood board. for example, fire resistance. the melamine plywood board has the function of self-extinguishing from the fire and so on. Besides, the melamine plywood board can installed. without the steps of paint and paint. which is convenient and fast, and avoids paint pollution

 disadvantages of plywood 

       the quality of the melamine plywood board. the formaldehyde content may be far exceed the standard. affecting the health of the body. thus requiring consumers to choose the quality of the big brands. to buy the melamine plywood board. Besides, although the melamine plywood board is easy to install. it also needs small wings, because once the surface of the melamine plywood board damaged. it is permanent damage and difficult to repair.

finger joint board  processing  

        The finger joint board is a board made up of many pieces of wood. Because the vertical wood board of this kind of board adopts a jagged interface. surface seasoning  checks is very like the cross joint of two fingers, so there is finger joint. The board said. The finger joint plate is also divided into two types of bright teeth. and dark teeth in the production process. 

       The dark teeth are the best. because the bright teeth are more likely to appear uneven after painting, of course. the processing of dark teeth is more difficult. In the choice of wood for the finger joint. the harder the wood, the better, because its deformation is much smaller. and the pattern will be more beautiful.

  melamine plywood board  processing   

    melamine plywood board: melamine plywood board is also called melamine board. is to put paper with different colors or textures into the eco-plate resin adhesive soak. and then dried to a certain degree of solidification. paving it in particleboard, moisture-proof board. medium density a heat-pressed  decorative panel on the surface of fiberboard, plywood, blockboard. or other hardboard

  More Reading:

  How To Maintain The Melamine Bookshelf To Make It Last Longer?


box joint. table saw. quick reply. plywood finger. additional information. miter gauge. join date. related products. wood news. dado set. stacked dado. dado blade. buildings slated. southeast asia. golds coppers. rich brown. silver grain. grain highlights. net dimensions. surfaced four. four sides. sides s4s. s4s eased. eased four. edges e4e. custom millwork. millwork available. holes oxide. oxide stains. stains prefilled. occasional sound.